ADALM PLUTO

ADALM PLUTO SDR

12-Bit Software Defined Radio – 5mW Full Duplex – Ethernet or USB – Multi-Band – 2 Meters to 23 cm – 70Mhz to 6Ghz (Unlocked)

Stock Specs:

  • Portable self-contained RF transceiver module
  • Cost-effective Software Defined Radio platform
  • Based on Analog Devices AD9363–Highly Integrated RF Agile Transceiver and Xilinx® Zynq Z-7010 FPGA
  • RF coverage from 325 MHz to 3.8 GHz (Stock)
  • Up to 20 MHz of instantaneous bandwidth
  • Flexible rate, 12-bit ADC and DAC
  • One transmitter and one receiver, half or full duplex
  • MATLAB®, Simulink® support
  • GNU Radio sink and source blocks
  • libiio, a C, C++, C#, and Python API
  • USB 2.0 Powered Interface with Micro-USB 2.0 connector
  • High quality plastic enclosure

Pluto+ Aftermarket SDR

Pluto+ is an SDR platform that supports 2TX 2RX, Gigabit Ethernet and storage on a Micro SD card. The design draws on the well-known ADI ADALM-PLUTO and improves its shortcomings.

  • ADC/DAC:AD9363(Can hack to AD9361 or AD9364)
  • 2 Transmit and 2 Receive channels
  • RF Range:70MHZ~6GHZ
  • Ref Clock:VCTCXO 40MHZ 0.5ppm
  • SOC:Zynq7010 FPGA:28k
  • RAM:512M
  • FLASH:32M
  • USB:2.0  supports OTG
  • Ethernet:1000Mb
  • Micro SD: Bootable
  • DC IN:5V +-0.5V-2A micro-USB

SSH Commands

192.168.2.1 – User: root Password: analog

fw_setenv attr_name compatible
fw_setenv attr_val ad9364
fw_setenv maxcpus
reboot

Links

https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/ADALM-PLUTO.html

https://wiki.analog.com/university/tools/pluto

https://wiki.analog.com/university/tools/pluto/users/customizing

https://github.com/analogdevicesinc/plutosdr-fw

https://github.com/analogdevicesinc/plutosdr-m2k-drivers-win/

https://github.com/Manawyrm/sdrsharp-plutosdr/

Gallery